What is a chemical process pump?
Chemical raw materials are highly corrosive, toxic, flammable and explosive, so they all need special requirements for conveying equipment. Chemical process pumps are the general name of all kinds of pumps in chemical production, and chemical process pumps are used to treat corrosive chemical fluids.
What to Send a Chemical Process Pump Manufacturer
A chemical process pump manufacturer can only size and select the pump correctly when the process data is clear. For corrosive, toxic, flammable, or crystallizing liquids, a vague request such as “chemical pump” is not enough. The pump should be matched to the liquid, operating point, installation, and maintenance risk.
- Liquid data: chemical name, concentration, temperature, density, viscosity, solids, and crystallization risk.
- Hydraulic data: required flow, total head, suction condition, pipe length, valve layout, and filter pressure drop.
- Construction choice: centrifugal, magnetic drive, vertical, or diaphragm pump depending on leakage risk, priming condition, and duty cycle.
- Site limits: motor voltage, continuous or intermittent running, maintenance access, space limit, and environmental exposure.
If you are comparing pump types before sending an RFQ, start with the sealless pump vs mechanical seal pump guide and the chemical transfer pump page.
Chemical process pumps manufacturers
Different industries have high requirements for chemical process pumps, requiring uninterrupted production and assurance of environmental regulations, so it is vital to choose the right chemical pump for your production. Whether you are conveying corrosive liquids, toxic or flammable and other hazardous chemicals, QEEHUA PUMP has a chemical process pump to meet your requirements.
We are a well-known brand of chemical pumps in China, with more than ten years of experience in the production and development of corrosion resistant pumps, which have been used in chemical industry, semiconductor, PCB, painting, electroplating, oil refining, photovoltaic, printing and dyeing, waste water and waste gas treatment.
Chemical process pump of QEEHUA PUMP
MAGNETIC PUMP
CENTRIFUGAL PUMP
DIAPHRAGM PUMP
Vertical Pumps
Questions about Chemical process pump
What chemical pumps are commonly used in the chemical industry？
Pumps commonly used in the chemical industry, mainly magnetic pumps, others are: centrifugal pumps, vertical pumps, diaphragm pumps, etc.
What are the requirements for chemical pumps in chemical processes？
Requirements for chemical pumps in chemical installations
(1) Must meet the requirements of flow, head, pressure, temperature, cavitation margin and other process parameters.
(2) must meet the requirements of media characteristics.
① For pumps conveying flammable, explosive, toxic or valuable media, reliable shaft seals or leak-free pumps are required, such as magnetic drive pumps, diaphragm pumps, etc.
② For pumps conveying corrosive media, it is required that the overflow parts are made of corrosion-resistant materials.
③ For pumps conveying media containing solid particles, the over-flow parts are required to use wear-resistant materials, and the shaft seal should be flushed with clean liquid if necessary.
(3) Must meet the installation requirements of the site
In general, horizontal pumps can be used, but due to the environmental space limitations of the site, vertical pumps can be used.
HOW TO CONTACT QEEHUA PUMP
If you have any requirements about chemical pumps, please contact QEEHUA PUMP, and we will reply you as soon as possible.
